
VA40 - Vehicle amplifier
The VA40 50 W power amplifier serves as a docking station for RF40 radio vehicular configuration. Besides amplification of RF signal it provides RF40 firm attachment and its interconnection with vehicle intercom system, Data Terminal Equipment (BMS), antennas and power supply. To conduct dismounted operation VA40 allows for easy and fast removal of installed radio – “Jerk&Run” support. It also features a special slot for connection of extension Mission Module. Integrated co-site filters make it possible to simultaneously operate multiple radios at close distance.

ZV13.1 - Power amplifier 50 W (Net)
RF power amplifier for RF13 transceivers. ZV13.1 amplifier includes a high speed data modem with GMSK modulation and 16 kbit/s data bit rate in RF channel. This modem is fully compatible with MD13.1 radio modem and it can be configured in two SW versions: network (Net) or direct line (P2P). The amplifier is installed with the RF13 transceiver and together they form the mobile set. The unit is installed in a mounting frame.

ZV13.1 - Power amplifier 50 W (P2P)
RF power amplifier for RF13 transceivers. ZV13.1 amplifier includes a high speed data modem with GMSK modulation and 16 kbit/s data bit rate in RF channel. This modem is fully compatible with MD13.1 radio modem and it can be configured in two SW versions: network (Net) or direct line (P2P). The amplifier is installed with the RF13 transceiver and together they form the mobile set. The unit is installed in a mounting frame.