Delta's products for HF/VHF/UHF transmit and receive signal distribution include high power transmit matrices, coaxial transfer switches, coaxial relays, receive matrices, and receiver multicouplers plus matrix control units and serial interfaces for remote control and status monitoring of the transmit and receive matrices.
The Model RCCR-1 X 4 Remote Controlled Coaxial Relay provides locally and remotely controlled RF switching between one transmitter rated at up to 2 kW average power/6 kW peak power and four antennas operating over a DC to 32 MHz frequency range. The RCCR-1 X 4 provides four momentary pushbutton switches to locally select the antenna to be connected to the transmitter. The pushbutton switch associated with the selected antenna illuminates to indicate the connection of the antenna to the transmitter. The RCCR-1 X 4 unkeys the transmitter via the interlock circuit prior to RF switching to prevent hot RF switching. Upon completion and verification of the RF switching, the RCCR-1 X 4 closes the interlock relay to enable the transmitter to be keyed. The RCCR-1 X 4 is equipped with a RS-232 or RS-422 serial data interface to enable remotely controlled RF switching.
The modular design of the Remote Controlled Coaxial Relay accommodates different transmitter/antenna switching requirements ranging from 1 transmitter/2 antennas to 1 transmitter/8 antennas as well as 2 transmitters/2 antennas transfer switching. Different RF power levels and operational frequency ranges varying from 2 kW average at 32 MHz/500 W average at 400 MHz to 750 W average at 32 MHz/200 W average at 400 MHz are accommodated by equipping the unit with alternate coaxial relay types or connectors.
For more information about our HF/VHF/UHF products, select from the following:
Transmit Matrices, Coaxial Transfer Switches and Coaxial Relays
Matrix Control Units, Serial Interfaces and Remote Control Software
Receive Matrices and Receiver Multicouplers
HF Impedance Bridge and Receiver/Generator Products
RF Ammeter Products
Receiving Antenna System
Announcing our Remote Controlled Coaxial Relay
The Model RCCR-1 X 4 Remote Controlled Coaxial Relay provides locally and remotely controlled RF switching between one transmitter rated at up to 2 kW average power/6 kW peak power and four antennas operating over a DC to 32 MHz frequency range. The RCCR-1 X 4 provides four momentary pushbutton switches to locally select the antenna to be connected to the transmitter. The pushbutton switch associated with the selected antenna illuminates to indicate the connection of the antenna to the transmitter. The RCCR-1 X 4 unkeys the transmitter via the interlock circuit prior to RF switching to prevent hot RF switching. Upon completion and verification of the RF switching, the RCCR-1 X 4 closes the interlock relay to enable the transmitter to be keyed. The RCCR-1 X 4 is equipped with a RS-232 or RS-422 serial data interface to enable remotely controlled RF switching.
The modular design of the Remote Controlled Coaxial Relay accommodates different transmitter/antenna switching requirements ranging from 1 transmitter/2 antennas to 1 transmitter/8 antennas as well as 2 transmitters/2 antennas transfer switching. Different RF power levels and operational frequency ranges varying from 2 kW average at 32 MHz/500 W average at 400 MHz to 750 W average at 32 MHz/200 W average at 400 MHz are accommodated by equipping the unit with alternate coaxial relay types or connectors.
For more information about our HF/VHF/UHF products, select from the following:
- Model SLS-4/SLS-4M Strip Line Switch
- Model SLS-5/SLS-5M Strip Line Switch
- Model SLS-7/SLS-7M Strip Line Switch
- Model 6730E and Model 6732E 1-5/8" EIA Coaxial Transfer Switches
- Model 6740B and Model 6742B 3-1/8" EIA Coaxial Transfer Switches
- Model RCCR-1 X 4 Remote Controlled Coaxial Relay
- Model MCU-8 Matrix Control Unit
- Model MCU-9 Matrix Control Unit
- Model LSSI Large Switch (16 x 16) Serial Interface
- Model MSSI Medium Switch (8 x 8) Serial Interface
- Model SSSI Small Switch (4 x 4) Serial Interface
- Remote Control and Diagnostic Test Software
- Model RM-1 Receive Matrix
- Model MC-1 X 8, MC-1 X 12, MC-1 X 16, MC-1 X 24 and MC-1 X 32 Receiver Multicouplers
- Model MC-1 X 8-3, MC-1 X 12-3, MC-1 X 16-3, MC-1 X 24-3 and MC-1 X 32-3 Receiver Multicouplers with 3 dB Gain
