T-9000E SOFTWARE-DEFINED HF SSB/ISB TRANSMITTER/EXCITER
The Sunair T-9000E Transmitter/Exciter is a proven solution in communications applications requiring rugged, reliable, and flexible equipment.
It has been designed to be paired with out R-9000E Receiver to accommodate split-site operation or to be used for standalone, single-site transmitter operation.
This next generation transmitter operates continuously (100% duty cycle) with a 125 W PEP and average output in AME, NB-FM, USB, LSB, ISB, CW, Data, or MELPe-based Digital Voice modes.
The T-9000E Transmitter/Exciter uses software-defined digital signal processing (DSP) technology, which supports the latest developments in high-speed waveform processing. This technology enhances the functionality
of the CPU as well as the Synthesizer, Audio, and IF stages.
When operating in combination with our R-9000E Receiver, the radio offers Automatic Link Establishment (ALE) as an internal option in accordance with MIL-STD-188-141 A/B/C, FS1045A, and
S4538 as well as remote control and programming via Ethernet or serial port.
A serial port connector on the front panel allows for changes in the unit’s configuration.
The T-9000E, operating along an R-9000E, complies with MIL-STD-188-203-1A and STANAG 5511/5522 (TADIL-A/Link 11 and NILE/Link 22) for data link operation.
The T-9000E is also compatible with MIL-STD-188-110 A/B/C and STANAG HF modem waveforms.
The radio can accommodate Type 1 encryption such as ANDVT, KY-99, KG-84(), and KG-40 as well as commercial privacy devices or optional internal MELPe digital voice F/W with DES 56, AES 128 &
AES 256 encryption functions.
The audio interface supports analog or VoIP connections.
A large TFT display with wide viewing angle (>45º from normal) shows the unit’s operating status in English, while its advanced built-in-test (BITE) capability provides feedback to the lowest
replaceable unit (LRU) level providing English messages on the display and internal LED indications.
The T-9000E can operate from both ac and dc voltage sources, while its internal power supply minimizes undesirable RFI and EMC effects.
The radio’s intuitive modular design allows for ease of maintenance, expansion, and upgrade throughout the equipment life cycle at minimal expense.
Thousands of these radios are in daily service as integral components of critical strategic communications solutions worldwide.
- Software-Defined SSB and ISB Configurations
- Remote Control via Serial and Ethernet
- Comprehensive BITE to LRU
- Internal AC Power Supply
- Data Link – MIL-STD-188-203-1A TADIL A and Link 11/22 (Factory Installed Option)
- HF Data – MIL-STD-188-110 A/B and STANAG
- ALE – 2G MIL-STD-188-141 A/B and 3G STANAG 4538 (with companion R-9000D)
- Analog or VoIP Audio Interface, ED-137B Option
- 500 W, 1 kW, 5 kW and 10 kW LPAs
- 150 W and 1 kW Antenna Couplers
CERTIFICATIONS
FCC Identifier XVKRT-9000
EN 300 373-2 v1.2.1, EN 301 843-5 v1.1.1, EN 60950, Notified Body 1177
MIL-STD 810F, Method 516.5, Procedure 1
MIL-STD 810F, Method 514.5 & MIL-STD-167-1
MIL-STD-188-141 A and FS1045A
MIL-STD-188-141 B and STANAG 453
Data Link – MIL-STD-188-203-1A TADIL A and Link 11/22 (factory installed option when operating with an R-9000E)
HF Data – MIL-STD-188-110 A/B/C and STANAG
ALE – 2G MIL-STD-188-141 A/B/C and 3G STANAG 4538, when operating with an R-9000E (verify availability)
Secure Digital Voice (MELPe S4591)
STANAG 5511/5522
Type 1 encryption such as ANDVT, KY-99, KG-84(), and KG-40
MELPe digital voice F/W with DES 56, AES 128 & AES 256 encryption functions
