Power supplies, chargers

Battery packs, chargers, antennas, amplifiers, headsets, testing and inspection devices, frames and numerous accessories (fill guns, RF filter, mobile intercoms, rebroadcasting accessories). This wide range of accessories enables transceivers to be used in various configurations to meet diverse operation requirements.

SC40 Stationary charger designed to charge up to 8 LP40 batteries in both versions. The charger is installed in a watertight plastic case, which ensures high mechanical resistance, ease of transportation and storage of accessories.

VC40 Vehicle charger designed to charge up to two LP40 batteries in both versions. Waterproof and compact charger design ensures high mechanical strength and easy vehicle installation.

SL40 solar charger is designed to charge LiIon battery packs with type designations LP40S and LP40L for RF40 transceivers by solar radiation.
The charger design is waterproof.

Battery packs, chargers, antennas, amplifiers, headsets, testing and inspection devices, frames and numerous accessories (fill guns, RF filter, mobile intercoms, rebroadcasting accessories). This wide range of accessories enables transceivers to be used in various configurations to meet diverse operation requirements.

NM1302 Mobile charger is designed to charge BP1301 (NiCd), LP1302 (LiIon) and LP20 (LiIon) battery packs in vehicles providing 12 V or 27 V board mains.

NU1302 Universal charger is designed to charge and discharge up to eight BP1301 (NiCd), LP1302 (LiIon) and LP20 (LiIon) battery packs.

MA1302 vehicle support supplies #RF20# transceivers with power and charges battery packs for this transceiver in vehicles with 12 V or 27 V board mains (compatible with MIL-STD-1275B). When removed with the battery pack from the holder, the transceiver becomes portable and capable of normal operation.

Battery packs, chargers, antennas, amplifiers, headsets, testing and inspection devices, frames and numerous accessories (fill guns, RF filter, mobile intercoms, rebroadcasting accessories). This wide range of accessories enables transceivers to be used in various configurations to meet diverse operation requirements.

RM13 – Mobile quick charger is used for charging of the single battery pack RF13.1 by a constant current. This charger makes possible the charging of the battery pack at mobile sets by means of an on-board mains of 12 V or 24 V. Temperature increase of the battery pack above +43 °C causes the standard charging current switch-off and consequently the trickle charge mode is switched on. The chargers can be fixed to horizontal or vertical surfaces with four M4 screws. They are connected to the on-board mains by means of a power cable with a cigarette lighter adapter, which is included with the charger. The battery pack is fastened to the charger with a lever closure. The charging stops automatically.