RF1350 – Mobile set

This RF1350 Mobile set with maximal adjustable output power of 50 W can be installed in all wheeled and tracked vehicles. The RF13 transceiver and ZV13.1 amplifier are located next to each other in a springcushion frame. If the mobile set is designed for installation in wheel vehicles without artillery or mortar weaponry, or for fixed posts, you may use the lighter, non-cushioned frame 7007.100.30 instead of springcushion frame 7007.100.20. The RF1350 Mobile set can be controlled from one location. Technical parameters of the RF1350 Mobile set are identical with 2011.041.61 mobile set.

PN (RN): 2011.041.71

Technical parameters

Frequency range 30.000 MHz to 87.975 MHz
Input impedance 50 Ω
Output impedance 50 Ω
Channel spacing 25 kHz
Number of channels 2320
Channel selection from transceiver keyboard or handset
Operating modes simplex or semiduplex telephony or data transmission 16 kbit/s
Voice encryption through internal digital scrambler
RF power output 0.2 W reduced, 5 W nominal, 50 W amplified
Receiver sensitivity better than 0.5 μV at 12 dB SINAD
Effectively transmitted frequencies range
narrow band 300 Hz to 3400 Hz
wide band 150 Hz to 9000 Hz
Interface for connection of PC RS232C
Data transmission rate in radio channel max. 16 kbit/s

Modulation for data transmission GMSK
Modulation signal level for 4 kHz frequency deviation
for F3 operation 100 mV
for data 430 mV ± 50 mV
AF amplifier output power 1 W in loudspeaker with impedance 6 Ω
AF frequency range 300 Hz to 3000 Hz in 6 dB range
Nominal power supply voltage 27 V
Power supply voltage range 18 V to 33 V
Current consumption at reception 0.5 A/27 V, transmission 5 W:  1.3 A/27 V, transmission 50 W: 8 A/27 V
Continuous operation time in +50 °C min. 30 minutes
Operating temperature range -30 °C to +60 °C
Dimensions including frame (7007.100.20)
W 428 mm x H 224 mm x D 165 mm
Set weight including frame (7007.100.20) max. 15 kg
Note:
Customer can order modem in ZV13.1 power amplifier in Net or P2P configuration.